If you do happen to scan it, would you mind posting it somewhere or sending
it to me so I can get a copy of it?
Brian
-----Original Message-----
From:
[mailto:
Sent: Saturday, July 08, 2000 4:20 AM
To:
Subject: Re: VECTOR: Tempest Cabaret Marquee
In a message dated 7/8/00 12:37:42 AM Central Daylight Time,
writes:
> I've got a Tempest Cabaret that the marquee is starting to flake on. So,
I'm
>
> thinking it's time to take it out and at the very least put some sort of
> protective coating on it... and possibly scan it in (in case I need to
> reproduce it - if possible - since the marquees for the cabaret don't
seem
> to
> be as available as the upright).
>
> So, what I'm wondering is:
>
> 1) How do I get the thing off without damaging it?
> 2) What should I use to keep any further flaking from occuring?
1) You'll need to carefully drill out the rivets or push them out from the
inside of the cabinet (this might damage the wood).
2) I would use a spray clear acrylic paint, but then I'm not the artist in
the family. Definitely scan it first.
Kirby
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request . Please direct other
** questions, comments, or problems to neil .
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request . Please direct other
** questions, comments, or problems to neil .
