I'll agree with John on the longevity of these boards after corrosion
repair. While I have not conducted any long term scientific test I have
observed some cases where the corrosion will reappear. I currently use a
bead blaster myself & try to retin any area cleaned of corrosion but I still
have seen mixed results. I don't know if this is a matter of corrosion
remaining in the PCB material or what. Perhaps a longer chemical soak or a
different chemical soak is required?
Try to find a unblemished board if you can.
I've got a few Omega boards to test different approaches if anyone has
suggestions.
Kev
> True, they are serviceable, but I have found that they can take up to
> twenty hours to fix with the massive extent of corrosion damage. Not worth
> it. At least for a shop. Certainly the work that Clay did on his site
based
> on my research about dealing with battery corrosion can be successful, but
> this is an UGLY board to troubleshoot due to lots of sockets and many IC's
> near the battery. I have trouble believing that these boards can be
> reliable (like more than a few months) based on the few corroded ones that
> I have seen.
>
> John :-#)#
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request . Please direct other
** questions, comments, or problems to neil .
