At 04:37 PM 9/3/97 -0400, you wrote:
>So from the big picture, each axis can be viewed as an op-amp configured as an
>inverter driving the coils. (Note: This is from year old memory, it may be
>non-inverting. I'm going to have to dig out the schematics back out.)
>Of course, there is also the ancillary spot killer stuff, but that is an
>add on. This design should be somewhat linear, depending on the overall
>OTA gain.
It's non-inverting, the inverting input is used as the error correction's,
negative feedback. But other than that, you got it. :^)
-Zonn
