>> Latch "2" is reserved for expansion. (Specifically it's used to select
>> Portrait or Landscape monitor mode, and to control a couple of EEPOT's for
>> width control on the monitor from the menu software)
>
>I was curious about this, I didn't want to flip the monitor manually,
>is this what this is about ?
Right. I'm going to have one bit to select the monitor type. With a
little "adapter" board it'll switch the low-voltage inputs automatically.
Using a few more lines I can control a pair of digital potentiometers with
a couple op-amps that act as a width and height control that can be set
from the menu system. Kinda neat. The same board can be used as a Wells
Gardner adapter board as well...
-Clay
Clayton N. Cowgill Engineering Manager
_______________________________________________________________________
/\ Diamond Multimedia Systems, Inc.
\/ Communications Division http://www.supra.com/
