On Thu, 26 Mar 1998 10:58:41 -0800, Clay Cowgill < > wrote:
>
>> Did you see the LED flickering on the motherboard, Clay? (Paul's
>> original program never turned the LED off, so that might be the case
>> this time...then it'd be pretty hard to spot the resetting.)
>>
>LED looked to be on solid... If it's software controllable, have the
>state toggle at the end of the draw routine. We'll see if it's
>completing or not...
As Paul will tell you, that's a bad thing. The LED is hooked up to the reset
circuitry. When the LED is on, the CPU is in a reset state.
It probably only looks solid, but instead is flickering at a very fast rate.
(If it were solid you should see nothing on the screen.)
-Zonn
<><><><><><><><><><><><><><><><><><><><><><><><><><><><
------ ___ Member of A.A.C.S.:
|---- | ( ) Association for Artistically
/ / ( () ) Challenged Signatures
/ / //\\ // (__)
/ ---/ // \\ //\\ // zonn
-------| // \\/
