At 04:56 PM 6/23/98 -0400, Joel Rosenzweig wrote:
>Has anyone had a problem with their Amplifone jittering? What did you
>do to solve it?
>
>Last October, I rebuilt an HV board with a WinTron and a cap kit, and
>rebuilt the deflection board with a cap kit, minus the deflection
>transistors.
I seem to remember that Jeff Hendrix had this similar problem with an
ampliphone. It turned out that some wire (might have been the HV wire) off
the transformer was loose. I am speaking from faded memory here though.
Perhaps Jeff can remember. If you could stick a scope in XY mode off the
PCB outputs and they are "clean", then your jitter problem is the monitor.
-Anders.
-----------------------------------------
| Anders Knudsen
| ASIC Design Engineer
| Adaptec, Inc., Longmont, CO
|
| http://www.adaptec.com
=========================================
