On Thu, 18 Nov 1999, Joel Rosenzweig wrote:
> When I used a scope for this purpose, I used a TTL inverter, anything you
> like in the 7400 series. They don't require any additional circuitry to
> run, only power and ground. They are dirt cheap, and you can buy them at
> any electronics store.
Either I have a freakish scope, or I'm blind, but I've never had to put an
inverter on the Z input of my scope, and the picture looked fine. Well,
fine enough for debugging -- I wouldn't want to install it in the cab. :-)
-Chris
==========================================================
Chris Candreva -- -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
