I have one numbered 034482. I was told it was for a BZ but it does not
correspond to the numbers below. Hmmmm...
-roy-
----- Original Message -----
From: PlayerTwo < >
To: < >
Sent: Monday, December 27, 1999 6:18 PM
Subject: Re: Atari Power supplies
> Community guru Al Kossow posted the following on RGVAC a while back.
Found
> it to be useful, hopefully, you will too.
>
> P2
>
>
> 034633-01 was the original supply for B&W games and has
> no keying pins
>
> 035887-01 was the international supply for games like Battlezone with one
> keying pin
>
> 037394-01 was for all the color vector games, and has two keying pins
>
> 037671-01 was used in for the raster games. It appears similar
> to the one for Battlezone.
>
>
> -----Original Message-----
> From: John Robertson < >
>
> >One easy way to identify the XY supplies is to check the transformer part
> >number. I don't recall what they are, but a few minutes with the
> >schematics/parts list should enable you to make a list of transformers
vs.
> >games they went with. The transformer part # would also define the power
> >supply box and connectors for the most part...
> >
> >John :-#)#
>
