I just checked the manual and 034482 is the right part nimber for BZ. I
wonder if both numbers are correct.
Al?
-roy-
----- Original Message -----
From: chumblespuzz < >
To: < >
Sent: Monday, December 27, 1999 7:46 PM
Subject: Re: Atari Power supplies
> I have one numbered 034482. I was told it was for a BZ but it does not
> correspond to the numbers below. Hmmmm...
>
> -roy-
>
> ----- Original Message -----
> From: PlayerTwo < >
> To: < >
> Sent: Monday, December 27, 1999 6:18 PM
> Subject: Re: Atari Power supplies
>
>
> > Community guru Al Kossow posted the following on RGVAC a while back.
> Found
> > it to be useful, hopefully, you will too.
> >
> > P2
> >
> >
> > 034633-01 was the original supply for B&W games and has
> > no keying pins
> >
> > 035887-01 was the international supply for games like Battlezone with
one
> > keying pin
> >
> > 037394-01 was for all the color vector games, and has two keying pins
> >
> > 037671-01 was used in for the raster games. It appears similar
> > to the one for Battlezone.
> >
> >
> > -----Original Message-----
> > From: John Robertson < >
> >
> > >One easy way to identify the XY supplies is to check the transformer
part
> > >number. I don't recall what they are, but a few minutes with the
> > >schematics/parts list should enable you to make a list of transformers
> vs.
> > >games they went with. The transformer part # would also define the
power
> > >supply box and connectors for the most part...
> > >
> > >John :-#)#
> >
>
