On Wed, 29 Dec 1999, Dusty Nagle wrote:
> All semiconductors on V/H board
> All " on HV board
> Hor. and Ver. output to monitor
> All fuses are good
> All power supply fuses have AC power on them (I don't know how much Voltage
> they should have though, no schematics)
If you have access to a dual-channel scope with an XY Mode, beg borrow or
steal it. Use that to check the output of the board itself. You can also use
that to trace through either the board or monitor to see where things go to
hell.
-Chris
==========================================================
Chris Candreva -- -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
